Coolingmist Aux fuel port Meth Injection system is the best
option on the market. Direct port injection is the PROVEN best method of
secondary fluid injection regardless of what some say and try to push saying
charge pipe and throttle body injection is better.
Direct Port injection is the best way for secondary
injection of any fuel. Whether you are using the injection for in
cylinder cooling or for supplemental fuelling to the Factory system. Direct
port injection alleviates the worry for fluid distribution issues from poor
flowing inlet manifolds.
LESS ENGINE KNOCK MORE BOOST – Poor quality fuel
very often is the main performance hinderance of our engines. As car
manufactures reduce the displacement of engines and use turbochargers to
increase the engines output, today’s engines operate on the borderline between
optimal efficiency and detonation. Our fuel is being pushed to its limits and
struggling to support a combustion process free of engine knock, limiting us
from running higher levels of boost and achieving the greater performance
potential our engines are capable of. Water methanol injection immediately
lifts the boundaries of what can be achieved on pump fuel and is becoming a
common technique in today’s times for controlling engine knock, allowing for
higher levels of boost and greater performance from our engines.
ELIMINATE CARBON BUILD UP - Direct injection engines are prone to carbon build up on the backside of the intake valves. The main reason is that fuel and added detergents are not hitting the back of the intake valves as you have with port injection. By injecting the fuel directly into the cylinder instead of at the back of the valve, the petrol and detergents can’t clean the valve and port. Carbon is allowed to build up and can lead to an assortment of issues such as idle and drivability problems, loss of power, poor fuel economy, hard starts and misfire codes. Direct port water methanol injection solves this problem and is extremely effective at removing carbon build up on the backside of the intake valves and preventing future build up from occurring.
MORE FUEL MORE POWER - Performance enthusiasts looking to make more power know engines can quickly run out of fuel, limiting them from reaching higher levels of performance. Adding direct port methanol injection can provide additional fuel enrichment raising the ceiling and ability to make more horsepower vs the factory fuel system alone.
pump with EPDM seals
key can be used to adjust water pump pressure
Pressure Neutral Tubing (23ft 4cyl, 27ft 6cyl, 31ft 8cyl)
fittings needed for installation
Fuse Holder with 15 amp fuse
of red and black wire
Aux fuel kit
- Product Code: Auxfuel
- Availability: In Stock